Sitemap | E-mail:[email protected]

S32100 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S32100

Location » Home » Grades > Stainless Steels > S32100

Contact

+86-13880247006

E-mail: [email protected]

AISI S32100

Profile

This page is mainly introduced the S32100 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S32100,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Austenitic Chromium Nickel Titanium Stainless Steel (Titanium Stabilized)

Steel Garde:S32100
Type:Stainless Steels
Country:USA
Standard:AISI
Metallographic Structure:Austenite
Application:Austenitic Chromium Nickel Titanium Stainless Steel (Titanium Stabilized)

Relevant products:

S32168/321/S32100/1-4541 Tube

S32169/321H/S32109/1-4940 Tube

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
A 240 S32100	SAE	USA
A 249 S32100	SAE	USA
A 269 S32100	SAE	USA
A 276 S32100	SAE	USA
A 313 S32100	SAE	USA
A 314 S32100	SAE	USA
A 358 S32100	SAE	USA
A 409 S32100	SAE	USA
A 473 S32100	SAE	USA
A 580 S32100	SAE	USA
A 632 S32100	SAE	USA
A 778 S32100	SAE	USA
A 813 S32100	SAE	USA
A 965 S32100	SAE	USA
A814 S32100	SAE	USA
F738 Class A2-50 S32100	SAE	USA
F738 Class A2-70 S32100	SAE	USA
F738 Class A2-80 S32100	SAE	USA
F836 Class A2-50 S32100	SAE	USA
F836 Class A2-70 S32100	SAE	USA
F836 Class A2-80 S32100	SAE	USA
SA-240 S32100	AMS	USA
SA-358 S32100	AMS	USA
SA-403 S32100	AMS	USA
SA-813 S32100	AMS	USA
SA-814 S32100	AMS	USA
SA-965 S32100	AMS	USA
A 240 S32109	SAE	USA
A 249 S32109	SAE	USA
A 358 S32109	SAE	USA
A 813 S32109	SAE	USA
A 814 S32109	SAE	USA
A 965 S32109	SAE	USA
S32109	AISI	USA
SA-240 S32109	AMS	USA
SA-403 S32109	AMS	USA
SA-813 S32109	AMS	USA
SA-814 S32109	AMS	USA
SA-965 S32109	AMS	USA
KSUS321	NKK	Japan
SUS 321	JIS	Japan
SUS 321	JIS	Japan
SUS 321	JIS	Japan
SUS 321	JIS	Japan
SUS 321	JIS	Japan
SUS 321	JIS	Japan
SUS 321	JIS	Japan
SUS 321	JIS	Japan
SUS 321	JIS	Japan
SUS 321 FB	JIS	Japan

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.08
Mn		2.00
Si		1.00
P		0.045
S		0.03
Cr	17.00	19.00
Ni	9.00	12.00
N		0.10

Mechanical Properties

Tensile strength	367～936	σb/MPa
Yield Strength	048	σ 0.2 ≥/MPa
Elongation	76	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	421～939	-
HRC	30	-

Physical Properties

Thermal expansion	16-93	e-6/K
Thermal conductivity	71-49	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	8920-9152	째C
Density	8505-5224	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
S32100 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk