Sitemap | E-mail:[email protected]

S31100 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S31100

Location » Home » Grades > Stainless Steels > S31100

Contact

+86-13880247006

E-mail: [email protected]

SAE S31100

Profile

This page is mainly introduced the S31100 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S31100,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

Duplex (Austenitic-Ferritic) Chromium Nickel Stainless Steel

Steel Garde:S31100
Type:Stainless Steels
Country:USA
Standard:SAE
Metallographic Structure:Austenitic-Ferritic(Duplex steel)
Application:Duplex (Austenitic-Ferritic) Chromium Nickel Stainless Steel

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
A 276 S31100	SAE	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.05
Mn		1.00
Si		0.06
P		0.03
S		0.03
Cr	25.00	27.00
Ni	6.00	7.00
Mo
Ti		0.25

Mechanical Properties

Tensile strength	047～232	σb/MPa
Yield Strength	331	σ 0.2 ≥/MPa
Elongation	92	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	001～588	-
HRC	30	-

Physical Properties

Thermal expansion	04-78	e-6/K
Thermal conductivity	16-52	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	6088-9230	째C
Density	9957-1758	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
S31100 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk