Sitemap | E-mail:[email protected]

S32205 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S32205

Location » Home » Grades > Stainless Steels > S32205

Contact

+86-13880247006

E-mail: [email protected]

AISI S32205

Profile

This page is mainly introduced the S32205 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S32205,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

Duplex (Austenitic-Ferritic) Chromium Nickel Molybdenum Nitrogen Stainless Steel

Steel Garde:S32205
Type:Stainless Steels
Country:USA
Standard:AISI
Metallographic Structure:Austenitic-Ferritic(Duplex steel)
Application:Duplex (Austenitic-Ferritic) Chromium Nickel Molybdenum Nitrogen Stainless Steel

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
A 1049 S32205	SAE	USA
A 240 S32205	SAE	USA
A 270 S32205	SAE	USA
A 276 S32205	SAE	USA
A 479 S32205	SAE	USA
A 511 S32205	SAE	USA
A 789 S32205	SAE	USA
A 790 S32205	SAE	USA
A 815 CRS32205	SAE	USA
A 815 WPS32205	SAE	USA
A 928 S32205	SAE	USA
A 988 S32205	SAE	USA
SA-240 S32205	AMS	USA
SA-479 S32205	AMS	USA
SA-789 S32205	AMS	USA
SA-790 S32205	AMS	USA
SA-815 CRS32205	AMS	USA
SA-815 WPS32205	AMS	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.03
Mn		2.00
Si		1.00
P		0.03
S		0.02
Cr	22.00	23.00
Ni	4.50	6.50
Mo	3.00	3.50
N	0.14	0.20

Mechanical Properties

Tensile strength	201～983	σb/MPa
Yield Strength	542	σ 0.2 ≥/MPa
Elongation	10	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	957～151	-
HRC	30	-

Physical Properties

Thermal expansion	86-38	e-6/K
Thermal conductivity	58-57	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	0842-1548	째C
Density	0437-4455	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
S32205 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk