Sitemap | E-mail:[email protected]

S20910 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S20910

Location » Home » Grades > Stainless Steels > S20910

Contact

+86-13880247006

E-mail: [email protected]

AISI S20910

Profile

This page is mainly introduced the S20910 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S20910,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

Austenitic Chromium Nickel Manganese Molybdenum Stainless Steel

Steel Garde:S20910
Type:Stainless Steels
Country:USA
Standard:AISI
Metallographic Structure:Austenite
Application:Austenitic Chromium Nickel Manganese Molybdenum Stainless Steel

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
A 240 S20910	SAE	USA
A 249 S20910	SAE	USA
A 269 S20910	SAE	USA
A 276 S20910	SAE	USA
A 314 S20910	SAE	USA
A 580 S20910	SAE	USA
A 813 S20910	SAE	USA
A 814 S20910	SAE	USA
A 965 S20910	SAE	USA
F 1314 S20910	SAE	USA
F 2181 S20910	SAE	USA
F 621 S20910	SAE	USA
SA-240 S20910	AMS	USA
SA-403 S20910	AMS	USA
SA-813 S20910	AMS	USA
SA-814 S20910	AMS	USA
SA-965 S20910	AMS	USA
A 240 S21800	SAE	USA
A 276 S21800	SAE	USA
A 314 S21800	SAE	USA
A 479 S21800	SAE	USA
A 580 S21800	SAE	USA
A 959 S21800	SAE	USA
F 899 S21800	SAE	USA
S21800	AISI	USA
SA-240 S21800	AMS	USA
SA-276 S21800	AMS	USA
SA-479 S21800	AMS	USA
A 269 S21900	SAE	USA
A 276 S21900	SAE	USA
A 314 S21900	SAE	USA
A 473 S21900	SAE	USA
A 580 S21900	SAE	USA
A 813 S21900	SAE	USA
A 814 S21900	SAE	USA
S21900	AISI	USA
SA-813 S21900	AMS	USA
SA-814 S21900	AMS	USA
A 240 S24000	SAE	USA
A 249 S24000	SAE	USA
A 269 S24000	SAE	USA
A 276 S24000	SAE	USA
A 314 S24000	SAE	USA
A 580 S24000	SAE	USA
A 688 S24000	SAE	USA
A 814 S24000	SAE	USA
A 955 S24000	SAE	USA
S24000	AISI	USA
SA-240 S24000	AMS	USA
SA-688 S24000	AMS	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.06
Mn	4.00	6.00
Si		1.00
P		0.04
S		0.03
Cr	20.50	23.50
Ni	11.50	13.50
Mo	1.50	3.00
N	0.20	0.40
Nb	0.10	0.30
V	0.10	0.30

Mechanical Properties

Tensile strength	215～697	σb/MPa
Yield Strength	131	σ 0.2 ≥/MPa
Elongation	87	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	935～132	-
HRC	30	-

Physical Properties

Thermal expansion	66-69	e-6/K
Thermal conductivity	51-39	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	3359-5137	째C
Density	2344-2814	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
S20910 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk