Sitemap | E-mail:[email protected]

Waspaloy chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of Waspaloy

Location » Home » Grades > Stainless Steels > Waspaloy

Contact

+86-13880247006

E-mail: [email protected]

AMS Waspaloy

Profile

This page is mainly introduced the Waspaloy chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of Waspaloy,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed

Steel Garde:Waspaloy
Type:Stainless Steels
Country:USA
Standard:AMS

Standard Number:

ITEM	Standard Number	Descriptions
1	SAE AMS 5544J (2008)	Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed

Metallographic Structure:Precipitation-Hardening
Application:Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed

Relevant products:

waspaloy round bar

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
Waspaloy	AMS	USA
Waspaloy	AMS	USA
Waspaloy	AMS	USA
Waspaloy	AMS	USA
Waspaloy	AMS	USA
Waspaloy	AMS	USA
Waspaloy	AMS	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）	Similar	Remarks
C		0.07
Si		0.10
Mn		0.10
Cr		19.75
Ni		remaining
Mo		4.45
Co		14.00
W
Al		1.40
Cu
Ti		3.00
Fe		0.75
B		0.005
Zr		0.04

Mechanical Properties

Tensile strength	376～380	σb/MPa
Yield Strength	823	σ 0.2 ≥/MPa
Elongation	61	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	196～520	-
HRC	30	-

Physical Properties

Thermal expansion	00-67	e-6/K
Thermal conductivity	16-95	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	2606-1580	째C
Density	3830-2666	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
Waspaloy Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk