Sitemap | E-mail:[email protected]

SUS 310S chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of SUS 310S

Location » Home » Grades > Stainless Steels > SUS 310S

Contact

+86-13880247006

E-mail: [email protected]

JIS SUS 310S

Profile

This page is mainly introduced the SUS 310S chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of SUS 310S,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Cold finished stainless steel bars

Steel Garde:SUS 310S
Type:Stainless Steels
Country:Japan
Standard:JIS
Standard Number:

ITEM Standard Number Descriptions

1 G 4318 (2007) Cold finished stainless steel bars
Metallographic Structure:Austenite
Application:Cold finished stainless steel bars

ITEM	Standard Number	Descriptions
1	G 4318 (2007)	Cold finished stainless steel bars

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
KSUS310S	NKK	Japan
SUS 310 SFB	JIS	Japan
SUS 310 STB	JIS	Japan
SUS 310 STP	JIS	Japan
SUS 310S	JIS	Japan
SUS 310S	JIS	Japan
SUS 310S	JIS	Japan
SUS 310S	JIS	Japan
SUS 310S	JIS	Japan
SUS 310S	JIS	Japan
SUS 310S	JIS	Japan
SUS 310S	JIS	Japan
SUS 310S TPY	JIS	Japan
SUS 310SFB	JIS	Japan
SUS 310STP	JIS	Japan
SUS 310STP Y	JIS	Japan

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.08
Si		1.00
Mn		2.00
P		0.045
S		0.03
Cr	24.00	26.00
Ni	19.00	22.00
Mo
N

Mechanical Properties

Tensile strength	026～497	σb/MPa
Yield Strength	444	σ 0.2 ≥/MPa
Elongation	77	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	067～817	-
HRC	30	-

Physical Properties

Thermal expansion	40-17	e-6/K
Thermal conductivity	13-27	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	4231-1064	째C
Density	9598-7523	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
SUS 310S Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk