Sitemap | E-mail:[email protected]

1.4592 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 1.4592

Location » Home » Grades > Stainless Steels > 1.4592

Contact

+86-13880247006

E-mail: [email protected]

AFNOR 1.4592

Profile

This page is mainly introduced the 1.4592 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 1.4592,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

Steel Garde:1.4592
Type:Stainless Steels
Country:France
Standard:AFNOR

Standard Number:

ITEM	Standard Number	Descriptions
1	NF EN 10088-1	Stainless steels - Part 1: List of stainless steels
2	NF EN 10088-2	Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

Metallographic Structure:Ferrite
Application:Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
X2CrMoTi29-4	AFNOR	France

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.025
Si		1.00
Mn		1.00
P		0.030
S		0.010
Cr	28.00	30.00
Mo	3.50	4.50
Ni
Ti	4×(C+N)+0.15	0.80

Mechanical Properties

Tensile strength	427～753	σb/MPa
Yield Strength	910	σ 0.2 ≥/MPa
Elongation	03	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	932～647	-
HRC	30	-

Physical Properties

Thermal expansion	92-33	e-6/K
Thermal conductivity	80-47	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	0009-0216	째C
Density	4286-2437	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
1.4592 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk