Sitemap | E-mail:[email protected]

ISO 9C chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of ISO 9C

Location » Home » Grades > Stainless Steels > ISO 9C

Contact

+86-13880247006

E-mail: [email protected]

ISO ISO 9C

Profile

This page is mainly introduced the ISO 9C chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of ISO 9C,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Stainless steels - Chemical composition

Steel Garde:ISO 9C
Type:Stainless Steels
Country:International
Standard:ISO

Standard Number:

ITEM	Standard Number	Descriptions
1	ISO 15510 (2010)	Stainless steels -- Chemical composition
2	ISO 16143-2 (2004)	Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections
3	ISO 16143-3 (2005)	Stainless steels for general purposes -- Part 3: Wire
4	ISO/TS 15510 (2003)	Stainless steels - Chemical composition

Metallographic Structure:Ferrite
Application:Stainless steels - Chemical composition

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.08
Si		1.00
Mn		1.00
P		0.040
S		0.030
Cr	16.00	18.00
Ni
Mo	0.90	1.40
N

Mechanical Properties

Tensile strength	451～474	σb/MPa
Yield Strength	842	σ 0.2 ≥/MPa
Elongation	34	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	339～080	-
HRC	30	-

Physical Properties

Thermal expansion	33-49	e-6/K
Thermal conductivity	02-58	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	9083-6498	째C
Density	4365-3831	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
ISO 9C Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk