Sitemap | E-mail:[email protected]

X12Cr13E chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of X12Cr13E

Location » Home » Grades > Stainless Steels > X12Cr13E

Contact

+86-13880247006

E-mail: [email protected]

ISO X12Cr13E

Profile

This page is mainly introduced the X12Cr13E chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of X12Cr13E,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Steels for cold heading and cold extruding

Steel Garde:X12Cr13E
Type:Stainless Steels
Country:International
Standard:ISO
Standard Number:

ITEM Standard Number Descriptions

1 ISO 4954 Steels for cold heading and cold extruding
Metallographic Structure:Martensite
Application:Steels for cold heading and cold extruding

ITEM	Standard Number	Descriptions
1	ISO 4954	Steels for cold heading and cold extruding

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C	0.09	0.15
Si		1.00
Mn		1.00
P		0.040
S		0.030
Cr	11.50	13.50
Ni		1.00
Mo

Mechanical Properties

Tensile strength	999～784	σb/MPa
Yield Strength	236	σ 0.2 ≥/MPa
Elongation	28	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	050～250	-
HRC	30	-

Physical Properties

Thermal expansion	80-14	e-6/K
Thermal conductivity	70-64	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	2701-5712	째C
Density	3059-7864	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
X12Cr13E Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk