Sitemap | E-mail:[email protected]

ISO H4 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of ISO H4

Location » Home » Grades > Stainless Steels > ISO H4

Contact

+86-13880247006

E-mail: [email protected]

ISO ISO H4

Profile

This page is mainly introduced the ISO H4 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of ISO H4,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Stainless steels - Chemical composition

Steel Garde:ISO H4
Type:Stainless Steels
Country:International
Standard:ISO

Standard Number:

ITEM	Standard Number	Descriptions
1	ISO 15510 (2010)	Stainless steels -- Chemical composition
2	ISO 16143-1 (2004)	Stainless steels for general purposes -- Part 1: Flat products
3	ISO 16143-2 (2004)	Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections
4	ISO 16143-3 (2005)	Stainless steels for general purposes -- Part 3: Wire
5	ISO 4955 (2005)	Heat-resistant steels
6	ISO 6931-2	Stainless steels for springs - Part 2: Narrow strip
7	ISO/TS 15510 (2003)	Stainless steels - Chemical composition

Metallographic Structure:Ferrite
Application:Stainless steels - Chemical composition

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.08
Si		1.00
Mn		1.00
P		0.040
S		0.030
Cr	16.00	18.00
Ni		1.00

Mechanical Properties

Tensile strength	352～437	σb/MPa
Yield Strength	716	σ 0.2 ≥/MPa
Elongation	85	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	095～689	-
HRC	30	-

Physical Properties

Thermal expansion	03-50	e-6/K
Thermal conductivity	40-41	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	3968-3725	째C
Density	2512-7429	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
ISO H4 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk