Sitemap | E-mail:[email protected]

38H2N2MA chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 38H2N2MA

Location » Home » Grades > Stainless Steels > 38H2N2MA

Contact

+86-13880247006

E-mail: [email protected]

GOST 38H2N2MA

Profile

This page is mainly introduced the 38H2N2MA chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 38H2N2MA,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

Steel Garde:38H2N2MA
Type:Stainless Steels
Country:Russia
Standard:GOST

Standard Number:

ITEM	Standard Number	Descriptions
1	GOST 4543	Structural alloy steel bars. Specifications
	GOST 8479	Structural carbon and alloyed steel forgings. General specification

Application:Structural alloy steel bars. Specifications

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
38Х2Н2МА	GOST	Russia

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C	0.33	0.40
Si	0.17	0.37
Mn	0.25	0.50
Ni	1.30	1.70
S		0.025
P		0.025
Cr	1.3	1.7
Mo	0.20	0.30
Cu		0.30

Mechanical Properties

Tensile strength	306～694	σb/MPa
Yield Strength	229	σ 0.2 ≥/MPa
Elongation	63	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	275～397	-
HRC	30	-

Physical Properties

Thermal expansion	80-35	e-6/K
Thermal conductivity	14-47	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	1569-2081	째C
Density	2398-0126	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
38H2N2MA Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk