+86-13880247006
E-mail: [email protected]
| ITEM | Standard Number | Descriptions |
|---|---|---|
| 1 | GB 2270 (1980) | Seamless tubes |
| 2 | GB/T 1220 (1992) | Stainless steel bars |
| 3 | GB/T 1221 (1992) | Heat-resisting steel bars |
| 4 | GB/T 14975 (2002) | Stainless steel seamless tubes for structures |
| 5 | GB/T 3280 (2007) | Cold rolled stainless steel sheets and plates |
| 6 | GB/T 4226 (2004) | Cold finished stainless steel bars |
| 7 | GB/T 4237 (1992) | Hot rolled stainless steel sheets and plates |
| 8 | GB/T 4239 (1991) | Cold rolled stainless steel and heat resisting steel strips |
| 9 | GB/T 4240 (1993) | Stainless steel wires |
| 10 | GB/T 4356 (2002) | Stainless steel wire rods |
| 11 | GB/T 8732 (2004) | Steels of blade for steam turbine |
| 12 | JB/T 6398 (2006) | Heavy stainless acid resistant and heat resistant steel forgings |
| Material | Standard | Country |
| X12Cr13 | AWS | Germany |
| 1.4006 | AWS | Germany |
| X12Cr13 | B.S. | UK |
| 1.4006 | B.S. | UK |
| X12Cr13 | AFNOR | France |
| 1.4006 | AFNOR | France |
| X45Cr13 | DIN | Germany |
| 1.3541 | DIN | Germany |
| X12Cr13 | ISO | International |
| X52Cr13 | ISO | International |
| X12Cr13E | ISO | International |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.16 | 0.25 | ||
| Si | 1.00 | |||
| Mn | 1.00 | |||
| P | 0.035 | |||
| S | 0.030 | |||
| Ni | 0.60 | |||
| Cr | 12.00 | 14.00 |
| Tensile strength | 291～474 | σb/MPa |
| Yield Strength | 342 | σ 0.2 ≥/MPa |
| Elongation | 63 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 948～873 | - |
| HRC | 30 | - |
| Thermal expansion | 84-04 | e-6/K |
| Thermal conductivity | 87-32 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 8011-4146 | 째C |
| Density | 2045-4660 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| 2Cr13 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |