Sitemap | E-mail:[email protected]

S20910 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S20910

Location » Home » Grades > Stainless Steels > S20910

Contact

+86-13880247006

E-mail: [email protected]

AISI S20910

Profile

This page is mainly introduced the S20910 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S20910,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
S20910

Steel Garde:S20910
Type:Stainless Steels
Country:USA
Standard:AISI
Metallographic Structure:Austenite
Application:Chemical compositions of SAE wrought stainless steels

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
A 240 S20910	SAE	USA
A 249 S20910	SAE	USA
A 269 S20910	SAE	USA
A 276 S20910	SAE	USA
A 314 S20910	SAE	USA
A 580 S20910	SAE	USA
A 813 S20910	SAE	USA
A 814 S20910	SAE	USA
A 965 S20910	SAE	USA
F 1314 S20910	SAE	USA
F 2181 S20910	SAE	USA
F 621 S20910	SAE	USA
S20910	AISI	USA
SA-240 S20910	AMS	USA
SA-403 S20910	AMS	USA
SA-813 S20910	AMS	USA
SA-814 S20910	AMS	USA
SA-965 S20910	AMS	USA
XM-19,NITRONIC 50®,UNS S20910	UNS	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.06
Si		1.00
Mn	4.00	6.00
P		0.04
S		0.03
Cr	20.5	23.5
Ni	11.5	13.5
Mo	1.50	3.00
Nb	0.10	0.30
N	0.20	0.40
V	0.10	0.30

Mechanical Properties

Tensile strength	847～911	σb/MPa
Yield Strength	036	σ 0.2 ≥/MPa
Elongation	48	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	780～388	-
HRC	30	-

Physical Properties

Thermal expansion	86-32	e-6/K
Thermal conductivity	43-55	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	0556-0132	째C
Density	4176-1989	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
S20910 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk